It is composed of acrylic resin as base, cuprous oxide as main anti-fouling agent and exudate, etc..
The main characteristics can prevent the pollution of marine attached organisms such as barnacle, Duli, lime worm, Moss worm and algae from the bottom of the ship for a long time, and keep the bottom of the ship clean and the speed unaffected; Dry faster; Shigongfangbian, can be used without gas high pressure spraying, brush or roll coating and other different Fangfashigong. Air free high pressure spraying a dry film thickness of up to 100 μm; When the film thickness meets the prescribed requirements, the anti-fouling period can reach more than three years; Recognized by the China Classification Society.
The application is suitable for use in marine facilities such as bottom, wharves, offshore platforms, ship marks, and underwater steel gates for rust resistant paint to prevent biological deterioration of marine attachment.
Appearance reddish-brown, no light.
Construction parameters volume solid: 56 ± 3 %(as determined by GB/T9272 eqv ISO3233:1988); Dry film thickness: 50-100 μm; Wet film thickness: 89-178 μm; Theoretical dosage: 196-392g / M2; Flash point: 28 °C.
Dry time
Temperature 5 °C 20 °C 30 °C
Table stem ≤ 4h1 .5 h1h
Dry ≤ 36h24h16h
Duplication interval
Temperature 5 °C 20 °C 30 °C
Minimum 36h16h8h
Maximum 15d15d15d
It is suggested that the number of coating lanes and the thickness of the dry film of the anti-fouling paint should be determined according to the time between the ships to dock, or the thickness of the paint film should increase with the increase of the maintenance interval. The recommendations are as follows:
Docking interval month(month) new ship construction per dry film thickness(μm) * number of old ship maintenance per dry film thickness(μm) * number of roads
12 100 * 1 100 * 1
24 100 * 2 100 * 2
36 100 * 3 100 * 3
[Note]: The recommended number of coating lanes refers to the number of lanes when there is no gas spraying. The thickness of the paint film without air spray is equivalent to two to three lines of brush or roll. If using brush or roll coating, as long as the specified thickness of the paint film can be achieved. The number of coated lanes is not limited by the number of recommended lanes.
Application of paint 616 chlorinated rubber ferric red thick plasma rust resistant paint in front of the road(see the supporting table for specific matching methods with anti-rust paint)
Surface treatment of the front paint film must be dry; Remove all pollutants such as oil, dust, etc. from the front paint film
The temperature of the substrate under construction conditions must be higher than 3 °C above the dew point; Relative humidity not more than 85 %
Painting Method
No gas spraying diluent 102 diluent; 5 % dilution(in paint weight); The nozzle diameter is 0.4-0 .5 mm; Ejection pressure: 15-30 MPa(approximately 150-300 kg/cm2)
Roll / brush thinner 102 thinner; Dilution 0-3 %(by paint weight)
Cleaning agent 102 diluent
For safety measures, please refer to the product safety technical specifications of Zhongsheng Paint(Ningbo) Co., Ltd..
Packaging 25kg
Warranty period 12 months
Supplement(1) Thickness and Theoretical Usage of Paint Film
Dry film thickness(μm) 100 250 300
Theoretical dosage(g/m2) 392 980 1176
(2) The interval between the repainting of anti-rust paint and anti-fouling paint
The shortest drying time of the anti-rust paint system before coating anti-fouling paint is as follows:
Temperature 5 °C 20 °C 30 °C
Chlorinated rubber antirust paint 24h12h8h
(3) Spraying interval and launching time of anti-fouling paint
Temperature 5 °C 20 °C 30 °C
Minimum coating time 36h16h8h
Maximum recoating time 15d15d15d
Minimum launch time 36h24h16h
Maximum launch time 15d15d15d
(4) Ships sailing in fresh water
Ships sailing in freshwater areas, or ships that often travel between seawater ports and freshwater ports, and ships that generally spend no more than 4 days berthing in seawater ports, may not apply anti-fouling paint on the bottom of the ship.
(5) Maintenance of used ships
When the ship is docked, even if the paint film of the bottom paint is basically complete, the anti-fouling paint can not be directly painted on the old paint film. The sludge and salt of the paint film on the bottom of the ship should be washed with fresh water before the paint is painted. Then the marine attached organisms attached to the paint film, rust and loose old paint film should be shoveled away. The old anti-fouling paint film was closed with 615 chlorinated aluminum powder anti-rust paint and 616 anti-rust paint. Then paint 2-3 anti-fouling paints as needed. If the paint film of the undercoat has been damaged for the most part, white treatment shall be carried out to reapply the anti-rust paint on the undercoat and the anti-fouling paint on the undercoat according to the requirements of the new vessel.
Remark for the correct use of our products, please carefully read this manual "use guidelines."
Declare that the above information and data are based on our experience in testing and practical use and can be used as a construction guide. We are only responsible for the quality of the paint itself for the construction that we do not understand. We shall have the right to modify this instruction according to the continuous improvement of the product.
