The composition consists of epoxy resin, coal tar, epoxy curing agent, aluminum powder, iron oxide and other anti-rust pigments, physical pigments, Auxiliaries and solvents composed of two components of high-performance anti-rust paint.
846 epoxy asphalt thick slurry anti-rust paint is divided into 846-1 epoxy asphalt thick slurry anti-rust paint and 846-2, 846-3 epoxy asphalt thick slurry anti-rust paint. 846-1, 846-2, 846-3 are a component(also known as the base material), and 846A is a component B(also known as a curing agent).
The main characteristics have excellent water resistance and seawater resistance; Excellent chemical resistance and oil resistance; Good adhesion, impact resistance and wear resistance; Without gas spraying, the thickness of the dry film can reach 125 μm; It has good cathodic protection performance. Excellent anti-rust performance and durability; Recognized by China Classification Society
The application applies to the bottom of the ship, ballast water warehouse, pier steel pile, offshore oil drilling platform, hydraulic steel gate, mine steel support, pipeline internal and external walls, etc. for heavy corrosion resistant coatings.
Appearance 846-1 Silver Yellow: 846-2 Black: 846-3 Brown
Construction parameters
Product name 846-1 846-2 846-3
Ratios 846-1 :846 A 846-2 :846 A 846-3 :846A
(Weight ratio) = 7:4 = 7:4 = 7:4
Volume solid 67 ± 367 ± 3
Dry film thickness μm 125 125 125 125
Wet film thickness μm 187 187 187
Theoretical usage g/m2 220,224
Flash point 22 22 22
* The flash point of the curing agent 846A is 21 °C
Dry time
Temperature 5 °C 20 °C 30 °C
Dry 8h4h2h
Doing 48h24h16h
Complete cure 15d7d5d
Ripening time(mixed)(20 °C) 30 min
Application period(after mixing)(20 °C) 8h
(When the temperature is greater than 30 °C, the applicable period after mixing of group A and B is shortened with the increase of temperature. ).
Duplication interval
Temperature 5 °C 20 °C 30 °C
Minimum 48h24h16h
Maximum 15d7d5d
It is recommended that the number of coatings 846-1 primer, 846-2 or 846-3 paint without spray 1, dry film thickness 250U M, brush or roll coating need to be painted 2-3.
The front track is equipped with paint 702 epoxy zinc workshop primer, 703 epoxy iron workshop primer, 704 inorganic zinc silicate workshop primer, and 842 epoxy cloud iron anti-rust paint. Or direct coating in the derust quality to achieve Sa2. Level 5 steel plate.
When the rear channel is equipped with paint as a rust anti-rust paint on the bottom of the ship, it is necessary to paint the 616 chlorinated rubber ferrite thick plasma anti-rust paint on the 846.
Road, then paint 839 long-acting thick pulp anti-fouling paint.
846 epoxy asphalt thick slurry rust resistant paint can be used separately in the application without marine pollution.
Surface treatment has oxide-coated steel: sandblasting treatment to Sa2. Level 5; Non-oxide leather steel: sandblasting treatment to Sa 2.5, or grinding with elastic grinding wheel to St 3; Covered with shop primer steel: using light sandblasting or elastic grinding wheel plate at rust to St 3; Welding, flame cutting or pyrotechnical correction of burned parts: remove slag, spatter, polished and smooth, polished with elastic grinding wheel to St 3
The temperature of the substrate under construction conditions must be higher than 3 °C above the dew point; When the temperature of the substrate is below 5 °C, the reaction between the epoxy and the curing agent stops, and it is not suitable for construction. Winter anti-rust paint can be used for painting. Relative humidity not more than 85 %
Painting Method
No gas spray thinner 103 thinner; Dilution 0-5 %(by paint weight) nozzle diameter 0.4-0 .5 mm ejection pressure 20-30 MPa(approximately 200-300 kg/cm2)
Air spraying large area construction is not recommended, only for small area repair or small coated parts; diluent 103 diluent; Dilution 0-10 %(in paint weight); Nozzle diameter 2.0-3 .0 mm; Air pressure 0.2-0 .4 MPa(about 2-4 kg/cm2)
Rolling / brush is mainly used for small area painting and repair; Diluent 103 Diluent 0-3 %(by paint weight)
Cleaning agent 103 diluent
Safety measures refer to the product safety technical specifications of Zhongsheng Paint(Ningbo) Co., Ltd..
Packaging 846-1, 846-2, 846-3, 20L barrel 14 kg
846A 10L barrel 8kg
Warranty period 12 months
Remark for the correct use of our products, please carefully read this manual "use guidelines."
Declare that the above information and data are based on our experience in testing and practical use and can be used as a construction guide. We are only responsible for the quality of the paint itself for the construction that we do not understand. We shall have the right to modify this instruction according to the continuous improvement of the product.
