Our Products

Products
706 Antirust Paint
[ Back ]
Details

The composition consists of synthetic resin as the base material, zinc phosphate, ferric oxide, aluminum powder and other rust-resistant pigments, fillers, Auxiliaries and solvents.
The main characteristics are zinc phosphate as the main anti-rust pigment, lead free, non-toxic; Good anti-rust performance; Dry faster
The application is suitable for the use of anti-casting paint above the waterline of the ship and on the surface of the land steel structure. It can be used in conjunction with traditional coatings such as phenolic and alkyd.
Appearance red gray
Construction parameter volume solid 49 x 3 %(as specified in CB/79272 eqv1S 03233:99)
Dry film thickness 40 μm
Wet film thickness 82 μm
Theoretical dosage 102g/m2
Flash point 35 °C
Dry time(25 °C) surface dry ≤ 3h; Dry ≤ 24h
Duplication interval
Temperature 5 °C 20 °C 30 °C
Shortest 36h24h16h
Maximum unlimited
Recommended 2 routes, dry film thickness 80 μm
An intermediate coat or finish of various types of alkyd or phenolic paint applied to the back end.
Surface treatment of coated steel: sandblasting to Sa 2: Acid washing can also be used to eliminate oxidation and rust; Non-oxide leather steel: polished to St3 with elastic grinding wheel, or sand-blasting treatment to Sa 2; Steel coated with workshop primer: secondary rust removal at film damage and rust, grinding to St3; Welding, Flame Cutting or Fireworks Calibration Combustion: Sanding to St 3
The temperature of the substrate under construction conditions must be higher than 3 °C above the dew point; Relative humidity not more than 85 %
Painting Method
Air free spraying: diluent 104 diluent; 5 % dilution(in paint weight); The nozzle diameter is 0.4-0 .5 mm; Ejection pressure: 12-15 MPa(approximately 120-150 kg/c M2)
Air spray thinner 104 diluent dilution 0-10 %(by paint weight) nozzle diameter 2.0-3 .0 mm air pressure 0.3-0 .5 Mpa(approximately 3-4 kg/cm2)
Roll / Brush thinner 104 diluent dilution 0-3 %(by paint weight)
Cleanser 104 diluent
Safety measures refer to the product safety technical specifications of Zhongsheng Paint(Ningbo) Co., Ltd..
Packaging 23 kg
Warranty period 12 months
Remark for the correct use of our products, please carefully read this manual "use guidelines."
Declare that the above information and data are based on our experience in testing and practical use and can be used as a construction guide. We are only responsible for the quality of the paint itself for the construction that we do not understand. We shall have the right to modify this instruction according to the continuous improvement of the product.