The silver chlorinated rubber surface paint consists of chlorinated rubber, plasticizer, aluminum powder, additives and solvents.
The main characteristics of water vapor and oxygen to paint film permeability is low, with excellent water resistance and good corrosion resistance; It has excellent low-temperature construction performance and can be constructed at -20 °C ~ 50 °C. Dry is fast, several times faster than the dry of alcoholic acid paint; Good durability and durability.
The application is suitable for the protection and decoration of various steel structures such as waterline, hull, superstructure, bridge, container, hydraulic gate, etc..
Appearance Silver
Construction parameter volume solid volume 40 % soil 3 %(as determined by CB/T9272 eqv IS 03233 :1988)(after mixing)
Matching group A: Component = 11:42(weight ratio)
Dry film thickness 40 μm
Wet film thickness 100 μm
Theoretical dosage 110g/m2
Flash point A component 27 °C, B component 35 °C
Dry time(25 °C) Table dry ≤ 2H, dry ≤ 24h
Coating interval
Temperature 5 °C 20 °C 30 °C
Minimum 36h24h12h
Maximum unlimited
It is recommended that the air spraying or non-AIR spraying 1-2 channels with a dry film thickness of 40-80 μm
The front track is equipped with paint 615-1, 615-2 aluminum powder chlorinated rubber rust resistant paint for anti-rust primer, 616 chlorinated rubber iron-red thick pulp
Type anti-rust paint is a middle layer paint, or H06-4 epoxy anti-rust paint is a primer paint, and 842 epoxy anti-rust paint is a middle layer paint.
The surface treatment front paint should be completely dry; Except for all the grease and dirt on the paint.
The temperature of the substrate under construction conditions must be higher than the dew point at 3 °C; Relative humidity not more than 85 %
Painting Method
No air spray thinner 101 thinner; 5 % dilution(in paint weight); Nozzle diameter 0.4-0 .5 mm; Spray pressure 15-20 MPa(with 150-200 kg/cm2)
Air spray thinner 101 thinner; Dilution 0-10 %(in paint weight); Nozzle diameter 2.0-3 .0 mm; Air pressure: 0.3-0 .4 MPa(about 3-4 kg/cm2)
The thickness of the recommended dry film can not be reached with a roll / brush coating; diluent 101 diluent; Dilution 0-3 %(in paint weight).
Cleaning agent 101 diluent
Safety measures refer to the product safety technical specifications of Zhongsheng Paint(Ningbo) Co., Ltd..
Packaging 21kg
Warranty period 12 months
Remark for the correct use of our products, please carefully read this manual "use guidelines."
Declare that the above information and data on this product are based on our experimental and practical experience and can be used as a construction guide. We are only responsible for the quality of the paint itself for the construction that we do not understand. We shall have the right to modify this instruction according to the continuous improvement of the product.
